A completely customizable battery welding jig/tray I designed for building DIY battery packs. In the dropdowns, simply select your cell size, width count, and length count.
Width and Length counts dictate how many cells wide and long you want the jig to be. For example, selecting 3 for width and 3 for length would result in a 3×3 jig that holds 9 total cells.
Current cell sizes supported, in up to a 6×6 configuration:
18650
21700
26650
32650/32700/32140 (they’re all the same diameter, just different lengths)
D
This is 3D printed in PETG, not PLA. The glass transition temperature is around 80°C (translation: Your battery would have to get pretty spicy before the structural integrity is compromised)
The jig is designed with a 2mm gap in between cells to allow airflow if you wish to actively cool the pack. The cells sit flush with the omni-directional traceways to allow you to weld the batteries in any parallel/series configuration you wish.
In the photos, you can see a custom 3×4 pack I built out of 32140 sodium ion cells for the world’s first sodium ion powered electric skateboard, which you can see in action here:
https://www.youtube.com/watch?v=NOARBGGVd54&list=PLnybDcBrf88hDSw040opVNqO5_5HWSies&index=1&pp=iAQB
A completely customizable battery welding jig/tray I designed for building DIY battery packs. In the dropdowns, simply select your cell size, width count, and length count.
Width and Length counts dictate how many cells wide and long you want the jig to be. For example, selecting 3 for width and 3 for length would result in a 3×3 jig that holds 9 total cells.
Current cell sizes supported, in up to a 6×6 configuration:
18650
21700
26650
32650/32700/32140 (they’re all the same diameter, just different lengths)
D
This is 3D printed in PETG, not PLA. The glass transition temperature is around 80°C (translation: Your battery would have to get pretty spicy before the structural integrity is compromised)
The jig is designed with a 2mm gap in between cells to allow airflow if you wish to actively cool the pack. The cells sit flush with the omni-directional traceways to allow you to weld the batteries in any parallel/series configuration you wish.
In the photos, you can see a custom 3×4 pack I built out of 32140 sodium ion cells for the world’s first sodium ion powered electric skateboard, which you can see in action here:
https://www.youtube.com/watch?v=NOARBGGVd54&list=PLnybDcBrf88hDSw040opVNqO5_5HWSies&index=1&pp=iAQB